Hard Drive Problems; Keyboard Or Mouse Problems - Fujitsu Lifebook A3040 User Manual

Fujitsu lifebook a3040: user guide
Hide thumbs Also See for Lifebook A3040:
Table of Contents

Advertisement

Problem
The Media Player Access
indicator on the Status
Indicator Panel blinks at
regular intervals when
no disc is in the tray or
the media drive is not
installed.
The notebook fails to
Auto-Play a DVD movie.
The media player will
not play international
DVD titles

Hard Drive Problems

You cannot access your
hard drive.

Keyboard or Mouse Problems

The built-in keyboard
does not seem to work.
Possible Cause
The Windows media player auto
insert notification function is
active and is checking to see if a
media disc is ready to run.
The media player software has
not been installed.
The region code for the DVD
does not match that of the media
player.
The setup utility is incorrectly set
for your internal (Primary
Master) or optional second hard
drive (Primary Slave).
The wrong drive designator was
used by an application when a
bootable CD-ROM was used to
start the LifeBook notebook.
Security is set so your operating
system cannot be started without
a password.
The LifeBook notebook has gone
into Suspend mode.
Your application has locked out
your keyboard.
T r o u b l e s h o o t i n g
Possible Solutions
This is normal.
Locate and install the DVD-ROM Applications CD.
All Fujitsu notebook DVD players are set to play
DVD titles with region code number 1, which is
specified for the North American market. The
region number is a regional restriction code defined
by the DVD Forum acting on the requirements of
Hollywood. Different region codes are recorded on
video DVD titles for publication in different areas of
the world. If the regional code of the DVD player
does not match the regional codes on the titles, then
playback is impossible.
NOTE: You can change the region code on the DVD
player using the Properties menu of the DVD soft-
ware. Note, however, that you can only change the
region code up to four times. After the fourth
change, the last region code entered becomes
permanent, and cannot be changed.
Revise BIOS settings to set both Primary Master
and Primary Slave correctly. (See BIOS Setup Utility
on page 29 for more information)
Verify drive designator used by application is in
use by the operating system. When the operating
system is booted from a CD, drive designations
are automatically adjusted.
Verify your password and security settings.
Push the Power/Suspend/Resume button.
Try to use your integrated pointing device to restart
your system. If this fails, turn your LifeBook note-
book off press the Power/Suspend/Resume button
for 10 seconds or more, and then turn it back on.
71

Advertisement

Table of Contents
loading

Table of Contents