26
PROGRAMMING MODE
4-1. how to change sunday
Entering set up
mode.
You will see LqC1
NOTE
As explained on the previous page, other days can be set up by the same method.
Press the high Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Display
.
Press the Start button.
Press Med Temp.(+) or Low Temp. button and then select
or
.
Disable
Enable
Press the Start button.
The machine sets up the special price day (Sunday), then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type - Press "High Temp. " twice.
Button
display
One or the other will
display.