Panasonic DVD-S68GA Service Manual page 22

9.1.6. Digital P.C.B. and Power Supply
P.C.B.
1. Remove the 2 Screws (A).
2. Remove the Wire with Connector (A).
3. Remove the AC cord.
4. Remove the Wire with Connector (B),
Wire with Connector (C) and Wire with Connector (D).
5. Remove the FFC.
6. Remove the 4 Screws (B).
7. Remove the Digital P.C.B. and Power Supply P.C.B..
9.1.7. Mechanism Unit
1. Remove the Screw (A).
2. Remove the Wire with Connector (A) and Wire with
Connector (B).
3. Remove the FFC.
4. Remove the Mechanism Unit.
Manual release method of tray
1. Insert paper clips, etc. into the hole on the bottom of DVD
Drive, and slide the lever in the direction of arrow to eject
tray slightly.
2. Pull the tray in the direction of the arrow.
22