Table of Contents
Advertisement
RR37xx_8xx_28xx Controller Windows Boot RAID Installation Guide
g. After partitioning, continue and complete the Windows installation procedure.
Step 5 Disabling Hibernation
After Windows is installed, boot into the operating system and disable Hibernation.
Hibernation fails when the system is installed on a RAID; this bug will slow down or prevent
startup and disable sleep mode
If you do not turn the hibernation functionality off, you may experience the following
problems:
a) Shutdown time is extended by an additional 3-5 minutes.
b) You cannot shut down properly; you need to manually press the power switch button
of the motherboard to power off the system.
Please use administrator privileges to turn off hibernation using the following command
(Command Prompt utility): #powercfg /h off
Enter the command to check that the quick shutdown is turned off: powercfg / a
.
8
Advertisement
Table of Contents
