Common Washing Problems - Frigidaire GLGT1142CS0 Owner's Manual

Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory washing
results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POSSIBLE CAUSES POSSIBLE CAUSES POSSIBLE CAUSES
POSSIBLE CAUSES POSSIBLE CAUSES
•Detergent or liquid fabric softener
did not dissolve or disperse.
Blue stains
•Not enough detergent.
•Wash water temperature too
Discoloration,
low.
graying
•Incorrect sorting.
•Not enough detergent.
Greasy, oily stains •Undiluted liquid fabric softener
poured directly on fabric.
•Incorrect use of chlorine bleach.
Holes, tears, or •Unfastened zippers, hooks,
snags buckles.
•Rips, tears and broken threads.
•Overloading the washer.
•Degradation of fabric.
•Incorrect sorting.
Lint •Tissues left in pocket.
•Overloading the washer.
•Not enough detergent.
•Undissolved detergent has left
residue.
•Static cling is attracting lint.
•Load washed too long
•Pilling is normal with synthetic and
permanent press fabrics. This is
Pilling
due to abrasion from normal
(Fibers break off,
ball up and cling to wear.
fabric)
•Undissolved detergent.
•Some nonphosphate granular
Residue or powder
on dark items; detergents can combine with
Stiff, harsh fabrics. hard water minerals to form a
residue.
•Overloading the washer.
Wrinkling
•Agitation time too short.
•Wash water temperature too
Yellow buildup of
low.
body soil on
synthetic fabrics •Not enough detergent.
•Iron or manganese in water
supply, water pipes, or water
Yellow or brown
rust stains heater.
Common W Common W ashing Pr ashing Pr
Common W Common Washing Pr Common W ashing Pr ashing Problems
SOLUTIONS SOLUTIONS SOLUTIONS
SOLUTIONS SOLUTIONS
•If caused by detergent, mix 1 cup (240
ml) white vinegar with 1 quart (.95 L)
water in a plastic container. Soak item 1
hour. Rinse.
•If caused by fabric softener, rub stains
with bar soap. Wash.
•Rewash with correct amount of
detergent and hottest water safe for
fabric. Add bleach safe for fabric.
•Treat with prewash stain remover or
liquid detergent.
•Increase detergent and water
temperature. Rewash.
•Rub fabric softener stains with bar soap.
•May be irreversible if rips, tears and
seams cannot be mended.
•Reduce load size. Rewash using correct
water temperature, water level, and
amount of detergent.
•Add nonprecipitating water conditioner
to wash water.
•Add liquid fabric softener to final rinse.
•Dry load in dryer.
•Remove lint with lint brush or roller.
•Use a lint brush or shaver to remove
pills.
•Reduce load size.
•Add dissolved detergent to tub . Rewash
load.
•Mix 1 cup (240 ml) white vinegar to 1
gallon (3.8 L) warm water in plastic
container. Soak item. Rinse and rewash.
•Reduce load size.
•Rinse in cold water with liquid fabric
softener.
•Soak in detergent booster or product
containing enzymes.
•Wash in hot water (120°F/49°C) using full
permanent press cycle. Increase
detergent.
Add bleach safe for fabric.
•Or, treat with color remover.
•To restore discolored load of whites, use
rust remover safe for fabric.
Do not use chlorine bleach to remove
rust stains. It may intensify
discoloration.
9
oblems oblems
oblems oblems
PREVENTIVE MEASURES PREVENTIVE MEASURES PREVENTIVE MEASURES PREVENTIVE MEASURES PREVENTIVE MEASURES
•Add detergent before wash load. Then
start washer.
•Dilute fabric softener with water.
•Sort items by soil level and color.
•Use correct amount of detergent, hottest
water and bleach safe for fabric
•Use correct amount of detergent and
hottest water safe for fabric.
•Do not pour liquid fabric softener
directly on fabric. See package directions
or Washing Procedures for proper
diluting.
•Never pour chlorine bleach directly on
fabric.
•Check condition of items before washing.
See Washing Procedures for preparing
and loading the wash load.
•See Washing Procedures for sorting and
preparing the wash load.
•Do not overload washer.
•Use correct amount of detergent, water
temperature and water level.
•Use fabric softener in the washer to
lubricate fibers.
•When ironing, use spray starch or fabric
finish on collars and cuffs.
•Turn items inside out to reduce abrasion.
•Increase water temperature using hottest
water safe for fabric.
•Do not overload washer.
•Use liquid detergent or use
nonprecipitating water conditioner with
nonphosphate granular detergent.
•Do not overload washer.
•Remove items from washer as soon as
cycle is completed.
•Use liquid fabric softener.
•Wash synthetics frequently using water at
least 100°F (37°C ) and correct water level.
•Use nonprecipitating water softener.
•Before washing, run hot water for a few
minutes to clear lines.
•Drain water heater occasionally.
•For an ongoing problem, install an iron
filter in your water supply system.