Page 1
WINSTON SUITE WTN20-AU In keeping with our policy of continuous product development, we reserve 8/54028/0 Issue 4 the right to make changes without notice. OCN:11789 The product complies with the Australian Safety Standards and the Standard Electromagnetic Compatibility.
Page 3
Do not use outdoors. Technical Information Do not use this heater if it has been dropped. Model No: WTN20-AU Do not use this heater if there are visible signs of damage 230V 240V Heat Output Use this heater on a horizontal and stable surface.
Controls: See Fig. 4 Icon Display Function Description Press once to turn the product ‘ON’. Press a second time to put the product into ‘STANDBY’ Power / (When returning from ‘STANDBY’ mode the product will return to previous settings unless the product Standby has been unplugged, in which case it will reset to factory settings) Press multiple times to change the ‘SLEEP TIMER’...
Remote Control - See Fig. 4 1. Assemble the top of the mantel to the rear support using the supplied hardware. The maximum range of use is ~ 5metres. 2. Using the supplied hardware assemble the top and rear NOTE: It takes time for the receiver to respond to the transmitter.