Remote Control Setup - Sony RM-Y822A User Manual

8. CUSTOMIZATION

8-24. Remote Control Setup

Your DIRECTV ® HD Receiver's remote control can send signals to the HD Receiver in two ways.
Standard IR (Infrared) control allows the Remote Control to send signals to the HD Receiver
within a line of sight. RF (Radio Frequency) to send signals from outside a cabinet or even from
another room within your home. The Remote Control RF Antenna must be connected to use the
RF Remote feature (see section 3-8).
You can also choose to assign one of two remote ID's for IR Control or one of sixteen remote
ID's for RF Control. This can be useful if you have more than one Sony satellite receiver in your
home.
To choose the Remote Control type:
1. Press the MENU button on the Remote Control to display the on-screen menu.
2. Scroll down using " " on the remote control.
E
3. Select the System menu by pressing " ".
4. Scroll down to Remote Control using " ".
E
5. Pressing " ". Remote Control Setup Wizard will be displayed.
6. Choose the IR type or RF type using " D E ".
If you want the process to proceed, follow the instructions in Remote Control Setup Wizard.
7. Press the EXIT button on the remote control to return to TV viewing.
112