Advertisement
Unit.
closer.
and Nursery Unit such as walls, ceilings & buildings.
Try moving the Nursery Unit to another part of the
room.
move them farther apart.
Go to Pairing Parent and Child Unit section.
To ensure privacy, your Parent Unit is paired with your
with any other Nursery Unit.
If Parent Unit won't lock onto the Nursery Unit, or you
purchased a new Nursery Unit, follow the procedure below
to pair the Parent Unit and Nursery Unit. If you purchased a
new Parent Unit, skip Step 1. The new Parent Unit is ready
to pair with your Nursery Unit.
1. Erase the Pairing from the Parent Unit.
pressing the On/Off Button. Continue to hold the Volume
Down Button until you hear a single beep and all of the
ready to pair with Nursery Unit.
2. Pair the Parent Unit with Nursery.
The green power light should come on.
beep. The Parent Unit is now paired with Nursery Unit.
3. Repeat this procedure if you need to pair another
Parent Unit with the Nursery Unit.
Nothing happened when I turned on the Nursery Unit.
What do I do?
press the Channel Button on the Nursery Unit, then turn the
Nursery Unit off, and then on again.
6
Advertisement
