Table of Contents
Advertisement
Alignment and Adjustments
5-3 Liquid Crystal Screen Center Adjustment
After installing the new liquid crystal panel, make sure that the liquid crystal
screen center is aligned with the screen center. If they are not aligned, make
the following adjustments:
1. Using a hexagonal wrench, loosen the two screws that secure the liquid crystal
panel.
Note: Loosen the screws just until the panel can move easily.
2. Using two fingers, lift the liquid crystal upward. (The screen moves
downward.)
3. When moving the liquid crystal panel towards the left, the screen moves right
(and vice versa).
5. Repeat adjustments 2~4 until the screen center is aligned vertically and
horizontally.
6. Using a hexagonal wrench, refasten the two screws.
5-2
HEXAGONAL SCREW
(FOR SECURING LIQUID CRYSTAL PANEL)
FIG. 5-2
Samsung Electronics
Advertisement
Table of Contents
