JVC LT-50A331 Instructions Manual page 13

Connections to other equipment
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
Rear and Left of the unit
To PC/DVI AUDIO IN
NOTE:
• When using HDMI1/DVI IN to connect your HDMI or DVI devices, you must select the corresponding
audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the
image with no sound.
• The audio output from the devices connected by HDMI may not output the sound from the audio output jacks
of this unit for copyright protection.
In details, please check the table below.
Content
SACD/DVD-Audio
Others
* Depening on devices, the sound may not be output.
Using an AV Amplifier with built-in digital surround
If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems including
Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.
Rear of the unit
To DIGITAL AUDIO
COAXIAL OUT
Coaxial digital cable
(not supplied)
To Coaxial
Digital Audio Input
AV Amplifier with built-in digital surround decoder
NOTE:
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.
Audio cord (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
To HDMI IN
HDMI cable (type A connector)
Audio Out
Digital
Prohibited
Available*
(not supplied)
(not supplied)
Front
Speaker
(Left)
Surround
Speaker (Left)
To DVI output
DVI device
or
HDMI device
To HDMI output
Subwoofer
TV
Center Speaker
Front
Speaker
(Right)
Surround
Speaker
(Right)
13 EN