Shark ION ROBOT Instruction Booklet

ION
EASE OF A ROBOT. PERFORMANCE OF A SHARK.®
STEP 1 SET UP YOUR CHARGING DOCK
Place with its back against the wall
in an open, central location. Connect
charger cord to port on back, then
plug in cord.
Note: Placing your dock in a central
location with a wide view to your home
will improve your robot's ability to
return to the dock.
STEP 2 INSTALL THE SIDE BRUSHES
Snap the 2 included side
brushes onto the posts on
the bottom of the robot.
STEP 3 CHARGE YOUR ROBOT
Turn the power switch on
and place your robot on the
dock. When all 3 indicator
lights illuminate steadily in
blue, charging is complete.
Press Clean to send the
robot into action.
Don't forget to register your robot at registeryourshark.com
For assistance, contact us at 800-798-7398 or visit us online at sharkclean.com
© 2020 SharkNinja Operating LLC EASE OF A ROBOT. PERFORMANCE OF A SHARK., SHARK, and SHARK ION ROBOT are registered trademarks of SharkNinja Operating
LLC. AUTO-SENSE and SHARKCLEAN are trademarks of SharkNinja Operating LLC. AMAZON, ALEXA, and all related logos are trademarks of Amazon.com, Inc. or its affil-
iates. APPLE, the Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the
U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.
Please be sure to read the enclosed Shark® Owner's Guide prior to using your robot.
ROBOT
3 ft.
5 ft.
3
h
Charging
Time
NOTE: Power switch must be ON to charge.
CONGRATULATIONS ON YOUR
®
NEW SHARK ION ROBOT
STEP 4 PREP YOUR HOME FOR CLEANING
With Auto-Sense™ Navigation
technology, your robot maneuvers
around obstructions and navigates
its way out of tight spaces as it
3 ft.
cleans. To help your robot complete its
mission, prep your floor by removing
all obstacles, such as loose power cords,
clothes, toys, and low-hanging drapes.
STEP 5
DOWNLOAD THE SHARKCLEAN™ APP
Download the easy-to-use SharkClean app on your
iPhone™ or Android™—schedule or start cleaning from
anywhere. Just search
• Tips, Tricks, and FAQs
• Troubleshooting
• Voice control setup for the Google
Assistant and Amazon Alexa
Restart your phone
Reboot your robot
• Lift the robot off the dock, and turn
off the power switch on the side of
the robot. After 10 seconds, turn
the power back on and return the
robot to the dock.
Robot Traps
SharkClean in the app store.
CAN'T CONNECT?
Reboot your router
• Unplug the router's power cable
for 10 seconds, then plug it back
in. Allow several minutes for your
router to completely reboot and for
your robot to reconnect.
Robot Friendly
AV700_QSG_MP_Mv1