Preparations; Unpack The Machine; Connect To The Power Supply; Pack Away After Sewing - Singer M1150 Instruction Manual

PREPARATIONS

Unpack the Machine

1. Place the box on a steady, flat surface. Lift the machine out of the box, and remove the packaging.
2. Remove all outer packing material and the plastic bag.
3. Wipe off the machine with a dry cloth to remove any lint and/or excess oil around the needle area.
Note: Your sewing machine is adjusted to provide the best stitch result at normal room temperature. Extreme hot and cold temperatures
can affect the sewn result.

Connect to the Power Supply

Among the accessories you will find the power cord and the
foot control.
For this sewing machine, foot control model HKT7
(110-120V,50/60HZ,2.0A) / HKT72C (GS AX200-240V,
50HZ,0.5A) manufactured by Zhejiang Huaxing Electric Motor
Co.,Ltd (China) must be used.
Note: Consult a qualified electrician if in doubt as how to con-
nect the machine to the power source. Unplug the power cord
when the machine is not in use.
On the bottom right side of the sewing machine, you find the
connecting sockets and the ON/OFF button.
1. Connect the power cord to the socket on the bottom right
side of the machine (A). Plug the cord into the wall socket.
2. Press the ON/OFF switch (B) to "I" to turn on power and
light.
Sewing speed is regulated by pressing the foot control.
Note: After turning off the machine, residual power may remain
in the machine. This could cause the light to stay on for a few
seconds while the power is consumed. This is normal for an en-
ergy efficient appliance.

Pack Away after Sewing

1. Switch the main switch off. After switching off, residual power may still remain in the machine. This may cause the light to stay
on for a few seconds while the power is consumed. This is normal behavior for an energy efficient appliance.
2. Unplug the cord from the wall socket and then from the machine.
3. Wind the cord around the foot control for easy storage.
4. Place all accessories in the accessory tray. Slide the tray on to the machine around the free arm.
5. Place the foot control and cord in the space above the free arm.
6. Place the soft cover on the machine to help protect it from dust and lint.
For the USA and Canada
This sewing machine has a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.
B
A
7
English