Download Print this page

Silhouette Studio Manual

Download this manual

The Studio Collection

Page 1 The Studio Collection...
Page 2 Temple Disassembly Place disassembly tool (AC 336) between Close temple and press together behind lens and temple using the neccessary disassembly tool (AC 336). diameter on tool.
Page 3 Inclination Dismount temple. Adjust inclination with pliers. Hold the lens fixation with mounting Enclose loop completely with sideparts of pliers. pliers (P 0023).
Page 4 Reduction of temple opening Enlarging temple opening Dismount temple. Dismount temple. Hold lens fixation firmly with pliers. Hold lens fixation firmly with pliers. Support pliers with your thumb to avoid Bend side parts with long nose pliers the lens from slipping. NOTE: Protect the side parts with plastic Reduce temple opening by placing pressure or leather.
Page 5 Temple Mounting Version 1 Temple Mounting Version 2 Place sideparts at opening of SPX temple and press together.
Page 6 Temple Curving Curve temple ends in large movements. Do not heat or fold.