Summary of Contents for SECO-LARM ENFORCER DP-236Q
Page 1
DP-236Q Wireless Video Door Phone Manual Wireless operation – camera and monitor can Camera has built-in IR LEDs for nighttime operate from up to 492ft (150m) away operation Remotely and securely talk to visitors and Monitor includes a kickstand and a charging unlock doors or gates via the monitor base ...
Additional monitors are not By default, the monitor in the 2x Camera screw automatically paired with the Replacement Battery DP-236Q Complete Kit is paired camera. See pg. 10, Pairing 1x Screw cover with the camera. Additional Monitors. SECO-LARM U.S.A., Inc.
6. The monitor and camera contain no user-serviceable parts. Opening them may damage sensitive components and will void the warranty. Camera Tilted Camera with No Tilt 115º 115º Up 20º 170º 170º Left 20º SECO-LARM U.S.A., Inc.
The N.O. (normally open) output is wired to an electric lock. The camera and the Request-to- Exit Plate both activate the strike, allowing entry or egress. The electric lock’s power supply is wired to the COM (common) output. SECO-LARM U.S.A., Inc.
NOTE: Do not block the PIR sensor on the camera. Installation – Monitor: Install the monitor battery: Remove the battery cover on the back of the monitor and insert the included BP-6M lithium ion battery. BP-6M SECO-LARM U.S.A., Inc.
Page 7
LED will start to flash battery once per second. indicator Turn monitor OFF: While the monitor’s display is ON, hold the “ON/OFF” button for 3 seconds and the monitor will turn OFF. SECO-LARM U.S.A., Inc.
“Photo/Settings” button three times to select the PIR mode. 2. Use the up and down arrow buttons on the front of the monitor to turn the PIR sensor ON or OFF. 3. Press the “Talk” button to set the PIR sensor and exit programming mode. SECO-LARM U.S.A., Inc.
1. While the monitor is displaying the camera’s view, press the “Photo/Settings” button to manually take a photo. 2. If the user does not answer a call within 5 seconds, the camera will take a photo automatically. NOTE: If the monitor’s battery is low, the photo-taking function will not work. SECO-LARM U.S.A., Inc.
Two or three beeps confirm the pairing of the second or third monitor respectively. 4. Return the camera to the bracket: Mount the camera in the bracket. Press the doorbell button on the camera to test the connection. SECO-LARM U.S.A., Inc.
If the alarm persists, unplug the camera and remove the battery. Unplug each monitor and remove each monitor’s battery. Return the camera’s battery and reconnect it to power. Insert each monitor’s battery and reconnect each monitor to power. SECO-LARM U.S.A., Inc.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.