Move On A Map; Display Indicators; Find Locations - Nokia RM-437 User Manual

Hide thumbs Also See for RM-437:
Table of Contents

Advertisement

Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography that you download for use in this device.

Move on a map

The map coverage varies by country and region.
When you open Maps, the capital of the country you are
in or the location that was saved from your last session
is shown. The map of the location is also downloaded,
if needed.
To zoom in to your GPS position or your last known
location, press the function key and 0.
When the GPS connection is active,
shows your
current location on the map.
To move on the map, scroll up, down, left, or right with
the scroll key. The map is oriented towards north by
default.
To zoom in and out on the map, press the function key
and *, or the function key and #.
When you browse the map on the display, a new map
is automatically downloaded if you scroll to an area
which is not covered by maps already downloaded.
These maps are free of charge, but downloading may
involve the transmission of large amounts of data
through your service provider's network. For more
information on data transmission charges, contact
your service provider. The maps are automatically
saved in the device memory or on a compatible
memory card (if inserted).
Cyan
Cyan
Cyan
Cyan
Magenta
Magenta
Magenta
Magenta

Display indicators

The GPS indicator
on the bottom right
corner of the display shows the availability and
strength of the satellite signal. One bar is one satellite.
When the device tries to find a satellite, the bar is
yellow. When the device receives enough data from the
satellite to establish a GPS connection, the bar turns
green. The more green bars, the stronger the GPS
connection.
Initially, your device must receive signals from at least
four satellites to calculate the coordinates of your
location. After the initial calculation, signals from three
satellites may be enough.
The data transfer indicator
shows the
internet connection used and the amount of data
transferred since the application started.

Find locations

To find a location in the city or area displayed on the
map, enter the full or partial address of the location in
the search field, and press the scroll key. To find a
location in another city, enter the city and the full or
partial address, such as London Oxford Street, and
press the scroll key.
To find a specific address, or an address in another
country, select
Options
Search
> Addresses.
>
Country/Region *
and
City or post code
mandatory.
Yellow
Yellow
Yellow
Yellow
Black
Black
Black
Black
are
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

E63N series

Table of Contents