Installation (continued)
3
Locking the table into position
□
Rotate the lock as shown.
The following steps are only for those who wish to fold-
STOP
down the workbench. If you do not need to fold-down the
workbench, disregard the following steps.
4
Marking the mounting holes for
a wall installation
□
Using a stud finder, mark the center line of each wall
stud with a vertical reference line.
□
Mark the mounting holes for the mounting plate (BB)
portion of the workbench using a pencil (not included)
as shown.
Mounting holes
23 1/2" ~ 37 1/2"
5
Please contact 1-888-HD-HUSKY for further assistance.
16"
BB
Floor
HUSKYTOOLS.COM