Changing The Grips; Creating Cut-Out Covers - Nokia 3220 Manual

9232486_3220_2_en.fm Page 4 Thursday, January 20, 2005 1:31 PM
G e t t i n g s t a r t e d
4. Place the key mat in the new
front cover (3).
5. Replace the front cover by
pressing it gently onto the phone
until it snaps into position (4).
6. Align the top of the back cover
with the top of the phone (5),
press the bottom of the back
cover to lock it (6).

Changing the grips

1. Remove the covers from the
phone. See Changing the covers
on page 3.
4
2. To remove the grips slide them to
the top of the phone (1), then
remove the grip (2).
3. Replace the grips as shown.
4. Replace the covers of the phone.
See Changing the covers on
page 3.
Creating cut-out
covers
Use the plastic stencil to create a
cut-out cover using your own
design.
Note: Use normal, plain
paper as found in standard
printers or use a photo
print that is not thicker
than 0.3 mm. To avoid
affecting the antenna
performance the material
must not contain metal
particles.