Troubleshooting Guide; Specifications - ProScan PSP288-PL User Manual

TROUBLESHOOTING GUIDE

Symptom
AC plug not plugged into
No power
wall outlet.
Volume in minimum.
The connected device is
not in playback mode.
No sound
Sound output of the
connected device weak.
(AUX IN & BLUETOOTH
mode)
Volume level too high
Sound
Volume level of the
distortion
connected device too high.
(AUX IN & BLUETOOTH
mode)
Bluetooth
Not in the Bluetooth
reception
mode.
failure

SPECIFICATIONS

Power source:
Audio Power:
Radio Coverage:
Impedance of Speakers:
Loud speakers
Tweeters
Bluetooth working distance: Up to 10 meters measured in open space. (Wall
Remote working distance:
Cause
AC 120V~60Hz
20W(RMS)
FM 87.5 -108.0 MHz
8 Ohm, 10W x 2
8 Ohm, 5W x2
and structures may affect range of device)
Up to 5 meters, +/- 30 degree.
8
Solution
Plug it to the wall outlet
properly.
Adjust volume to a
desired level.
Play the music in the
connected device.
Adjust volume of connected
device.
Reduce the volume level
by press the VOL- button.
Reduce the volume level of
the connected device.
Try to do connection
again.