Reference - Canon 300X Instruction Manual

Reference

Feature Availability Table
Mode Dial Mode
One Shot
AI Servo
AI Focus
Auto
AF Point
Selection
Manual
Single frame
Continuous
Self-timer/
Remote control
Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide.
•
Nothing is displayed on the LCD panel.
The batteries are exhausted. / The batteries have been installed incorrectly.
Replace the batteries with new ones. / Install the batteries correctly. (p.11)
s
•
The picture looks blurred.
The lens focus mode switch is set to <MF>.
Set the lens focus mode switch to <AF>. (p.13)
s
There was camera shake when the picture was taken.
Hold the camera steady or use a faster shutter speed. (p.14)
s
•
The shutter does not work.
On the LCD panel, the frame count is not displayed and the <=> icon blinks.
Take out the film and load it correctly. (p.15)
s
The focus confirmation light <n> in the viewfinder blinks and focus
cannot be achieved.
Select another AF point. (p.29) If focus still cannot be achieved, focus manually. (p.31)
s
•
The <π> icon blinks on the LCD panel.
The battery level is very low.
Replace the batteries with new ones. (p.11)
s
A misoperation has occurred.
Press the shutter button halfway. (p.14) / Remove the batteries and reload it. (p.11)
s
π
If the < > icon does not stop blinking, consult your nearest service center.
: Set automatically.
U
I O P A S T R E W
Y
: User-selectable/settable.
Q
49