Connecting Other Devices; Connecting A Device With Analog Multichannel Output; Connecting A Device Compatible With The Trigger Function - Yamaha CX-A5200BL Owner's Manual

6

Connecting other devices

Connections with other devices are as shown below.

Connecting a device with analog multichannel output

You can connect an analog multichannel output device such as a DVD player and an SACD
player to the MULTI CH INPUT jacks.
X
The front channel output should be connected to the AUDIO 3 (AUDIO) jacks of the unit.
MULTI CH INPUT
The unit (rear)
jacks
MULTI CH INPUT
HDMI OUT
(HDCP2.2) AV 1
CENTER
2 1
L
ARC (1 MOV
MULTI CH INPUT AV 1 AV 2 AV 3 AV 4
CENTER (1 MOVIE) (5 STB) (6 GAME)
L
R R
SURROUND SUR BACK SUBWOOFER
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(7 TV) (3 MUSIC)
L
SURROUND SUR BACK SUBWOOFER
R
1 OPTICAL 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL
GND
AUDIO 3
AUDIO 4
REAR FRONT
R L R R
PRESENCE PRESENCE
AUDIO 3
(AUDIO) jacks
X
• You can select a video source to be displayed when "MULTI CH" is selected as the input source using "Video
Out" (p.113) in the "Option" menu. When connecting a video device (such as a DVD player) to the MULTI CH
INPUT jacks, use the input jack specified in "Video Out" for the video connection.
• Since the unit does not redirect signals input to the MULTI CH INPUT jacks to accommodate for missing
speakers, make appropriate settings on the external device (such as a DVD player) that suit to the speaker
configuration.
• When "MULTI CH" is selected as the input source, sound mode selection and tone control adjustment are not
available.
Channel output
(Center)
(Subwoofer)
(Surround
L
back)
R
Device with analog
L (Surround) multichannel output
R
L (Front)
R
Connecting a device compatible with the trigger
function
The trigger function can control an external device in conjunction with operating the unit (such
as powering on/off and input selection). If you have a power amplifier or a Yamaha subwoofer
that supports a system connection or a device with a trigger input jack, you can use the trigger
function by connecting the external device to one of the TRIGGER OUT jacks with a monaural
mini-plug cable.
TRIGGER OUT 1-2 jacks
The unit (rear)
TRIGGER
OUT
(HDCP2.2)
DMI NETWORK
HDMI OUT
(4 NET)
AV 4 AV 5 AV 6 AV 7
(HDCP2.2) (8 SERVER)
1
3
(ZONE OUT)
12V 0.1A
TRIGGER
OUT MAX. TOTAL
1
REMOTE RS-232C
12V 0.1A
IN OUT
MAX. TOTAL 2
2
(FRONT)
1
2
SUBWOOFER
R 2 L 1
(REAR) (FRONT)
SURROUND (REAR) FRONT REAR
CENTER
BACK SUBWOOFER PRESENCE PRESENCE
NNA
DIO)
PRE OUT
SURROUND FRONT
R FRONT CENTER L FRONT L SURROUND L L
BACK PRESENC
X
You can configure the trigger function settings in "Trigger Output1" and "Trigger Output2" (p.145) in the "Setup"
menu.
40
En
Trigger In
(+12V)
Power amplifier
System
connector
Yamaha
jack
subwoofer