Maintenance - HoMedics ParaSpa Pro Instruction Manual And Warranty Information

Paraffin bath
Table of Contents

Advertisement

Available languages

Available languages

N N O O T T E E : : Dipping process is quick. Do not leave hand or elbow in
the tub. Do not soak. Dip quickly in and out.
3. Repeat this step several times until several layers have formed, 6-10
coatings are suggested. If paraffin wax temperature is too warm or
too cold, adjust the temperature accordingly. Turn the dial
clockwise(right) to increase the paraffin wax temperature or counter-
clockwise(left) to reduce the paraffin wax temperature.
4. For extended warmth, place a plastic liner (provided) over the
treated area and twist bag at opening. Keep paraffin wax and liner
on treated area for 10-20 minutes for ultimate luxury. S S e e e e F F i i g g . . 4 4
5. Peel off the wax from the treated area. If using a plastic liner, peel
the plastic lining from the area being treated. Paraffin wax will peel
off with liner. S S e e e e F F i i g g . . 5 5
6. Discard used wax.
N N O O T T E E : : If you are the only person using the ParaSpa Pro, the wax
can be re-used. Simply put the wax back into the tub to re-melt.

Maintenance:

Periodically, the used portion of paraffin wax should be replaced and
the unit should be cleaned.
1. Unplug unit and remove grate. Allow paraffin wax to
solidify overnight.
2. Push on one end of paraffin wax block. This will tip it up. Lift the
block out of the unit and dispose of it. DO NOT USE SHARP
OBJECTS TO REMOVE THE PARAFFIN WAX BLOCK, THIS MAY
SCRATCH OR DAMAGE THE TUB. If the paraffin wax does not
remove easily, plug unit in and allow to heat for 10–15 minutes
then remove the paraffin wax block and unplug the unit.
3. Wipe the inside of the unit with a disposable towel to remove
residual dirt and paraffin.
4. With a damp, soapy cloth, wipe clean. DO NOT POUR WATER
INTO THE UNIT, OR IMMERSE THE UNIT IN WATER.
5. Store in a cool, dry place. When you are ready to re-use the
ParaSpa Pro paraffin bath for the next heat treatment, repeat steps
2-7, "How to set up the ParaSpa Pro unit". Then, follow steps 1-6,
"How to use the paraffin treatment."
6
ParaSpa Pro
Grate
Red LED Indicator
Indicates the warming
element is on
Tub
3-1lb. Bags of Paraffin Wax
Paraffin Bath
Green LED Indicator
Indicates unit is plugged
in and power is on
Lid
MIN./MAX.
Levels
Variable Warmth Control

Advertisement

Table of Contents
loading

This manual is also suitable for:

Par-150

Table of Contents