Philips AVENT SCF356 User Manual page 15

Note: If you want to feed your baby with the baby food at
the set temperature, you need to take the baby food out of
the baby bottle warmer and feed it to your baby right after
the baby bottle warmer switches off.
If you do not do this, the baby food slowly cools down.
Note: You cannot prolong the keep-warm mode of the baby
bottle warmer for more than 20 minutes.
3
Always check the temperature of the baby food before
you feed your baby. Gently stir the baby food in the baby
food container or jar and taste the baby food to ensure it
is not too hot (Fig. 21).
4
Unplug the appliance and empty the baby bottle
warmer (Fig. 13).
Re-using the baby bottle warmer right away for another
container of baby food
If you want to heat up another container or jar with baby food
right away, let the baby bottle warmer cool down for a few
minutes. To speed up this process, fill the baby bottle warmer
with fresh cold water. When you switch on the baby bottle
warmer, the progress indicator starts flashing from bottom to
top to indicate that the appliance is heating up again.
Note: If the progress indicator is on but does not flash, the
baby bottle warmer is still too warm to heat up another
container or jar with baby food. Please switch off the baby
bottle warmer, let it cool down for a few minutes and make
sure you fill it with fresh cold water.
Defrost setting
At this setting, you can defrost frozen milk or baby food.
Follow the steps indicated in sections 'Using the baby bottle
warmer to warm milk' or 'Using the baby bottle warmer to
warm baby food'.
ENGLISH
17