Desk Top Cradle
Desktop Cradle Power Supply
The mobile device must have a main battery (MX3A378BATT) installed when it is docked in a
cradle.
9000A301PSACUS
AC Power Supply, US, trickle charger
1. Plug the AC Power Supply into an uninterrupted power source, e.g. wall outlet.
2. Insert the single pin connector into the power port on the back of the desktop cradle. The
cradle LED turns orange when power is received.
3. Put the MX3X / MX3Plus in the cradle. The MX3X / MX3Plus CHGR LED illuminates
when the cradle is fully seated in the desktop cradle.
4. The cradle LED illuminates green when power is received, a mobile device is seated in the
docking bay, and the mobile device is receiving AC power through the cradle/device
connector.
E-EQ-MX3DKRG-J-ARC
Figure 9 Desktop Cradle AC Power Supply
MX3 Cradle Reference Guide
7