Safety And Instructional Decals - Toro HDX SD 2000 Series Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
Battery Symbols
Some or all of these symbols are on your battery.
1. Explosion hazard
2. No fire, open flame, or
smoking
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection.
5. Read the Operator's
Manual.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115 to 149 N∙m (85 to 110
ft-lb).
decalbatterysymbols
6. Keep bystanders away
from the battery.
7. Wear eye protection;
explosive gases can
cause blindness and other
injuries.
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard
93-7818
decaloemmarkt
1. Warning—do not touch the hot surface.
1. Warning–there is no rollover protection when the roll bar is
down.
decal93-7818
2. To avoid injury or death from a rollover accident, keep the
roll bar in the raised and locked position and wear the seat
belt. Lower the roll bar only when absolutely necessary; do
not wear the seat belt when the roll bar is down.
3. Read the Operator's Manual; drive slowly and carefully.
6
106-5517
107-3069
decal106-5517
decal107-3069