Advertisement
If your HD730 does not operate as
expected, first check the items in the
following list. If you cannot deter-
mine the source of the problem,
contact your dealer or authorized
Harman Kardon service representa-
tive.
NO LIGHTS ON THE FRONT
PANEL
•
Power cord is not plugged into
power outlet.
•
Wall outlet or extension cord is
faulty. Check for poor connec-
tions.
•
Breaker on plug strip has tripped.
Reset breaker.
FRONT PANEL LIGHTS ARE ON,
BUT THE CD DOES NOT PLAY
•
The disc may have been inserted
upside down. Make sure the label
side is facing up.
•
Moisture may have formed on the
laser/receptor inside the unit.
This sometimes occurs in damp
climates or when the unit is
moved from a cold to a warm
area. Leave the unit turned on at
room temperature for 30 minutes
to allow the moisture to evapo-
rate, then play your disc.
13
HD730 Engelsk
16
Troubleshooting Guide
THE PLAY INDICATOR LIGHTS,
BUT NO SOUND IS HEARD
•
The wrong SOURCE has been
selected on your integrated
amplifier/receiver/preamplifier.
Make sure you have selected the
SOURCE where your CD player is
connected.
THE SOUND SKIPS OR STUTTERS
DURING PLAYBACK
•
The disc may be dirty or damaged.
•
The unit may have been placed on
an unstable surface. Isolate the
unit from excessive vibration by
placing it on a firmer surface or
farther away from your speakers.
THE SOUND IS CONTINUOUSLY
DISTORTED
•
The cables from the HD730 have
been plugged into the wrong input
jacks on your integrated amplifier/
receiver/preamplifier. Make sure
you have not plugged the unit into
the PHONO jacks.
NOTHING HAPPENS WHEN
FUNCTION KEYS ARE PRESSED
•
Turn the power to the unit off, then
back on again.
THE DISPLAY SHOWS BROKEN
CHARACTERS
•
Turn the power to the unit off, then
back on again.
THE REMOTE CONTROL DOES
NOT FUNCTION CORRECTLY
•
Make sure you are using the
remote control within the 30°
angle described in this manual.
•
Make sure the remote transmitter
lens and the front panel REMOTE
SENSOR window are clean and
that no objects are blocking the
path from the remote control to
the REMOTE SENSOR area on
the front panel.
•
Make sure that no strong fluores-
cent lights are being used in the
listening room.
Check that the batteries inside the
•
remote control are fresh.
12/01/98, 15:32
Advertisement
