Audio Recording - Canon ZR80 Instruction Manual

Audio Recording

Changing the Audio Mode
You can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records
sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new
sound later. Select the 16-bit mode for higher sound quality.
CAMERA
AUDIO SETUP
( 39)
Open the menu and select [AUDIO SETUP]. Select [AUDIO MODE], set it to
[16bit] and close the menu.
"16bit" appears for approximately 4 seconds.
Wind Screen
You can reduce the wind noise when recording in windy places.
CAMERA
*
ZR90/ZR85 only.
AUDIO SETUP
( 39)
Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to
[ON] and close the menu.
"WS O" appears when you turn the wind screen on.
❍ Low sound may be reduced together with the wind noise. We recommend
turning off the wind screen for normal recordings.
❍
(when [AUDIO DUB.] is set to [MIC. IN] in the [AUDIO SETUP] submenu).
60
PLAY (VCR)
*
PLAY (VCR)
The wind screen function can also be used for audio dubbing
CARD CAMERA
AUDIO MODE•••12bit
CARD CAMERA
WIND SCREEN••OFF
CARD PLAY
CARD PLAY