La Crosse Technology W85923V4 Quick Start Manual

P R OJ E CTION AL AR M CLOCK
W I T H I ND OOR TEMP ER ATU RE
Q U I C K START GUID E
MODEL: W85923V4
DC: 033021
Full manual can be found under the Support tab here:
POW ER U P
1. Insert the stand into the bottom of your clock.
2. Insert the 5 volt Power Cord into an outlet, then into your
clock. Optional: Install 2-AAA batteries into your clock.
Focus
Wheel
PR OJ E C TI ON
Rotate Projection:
• Press the PROJECTION button to rotate the
image.
• The projected image can be rotated in 90
degree increments.
Focus Projection:
• Use the Focus Wheel on the back of your
projection arm to provide a clear projection
image.
Note: Power cord use is required for constant projection.
bit.ly/laxtech_support
AAA
AAA
Stand
Page 2
SE T T I N G S
1. Hold the SET button to enter the Settings Menu.
2. Use the + or - button to adjust and SET to confirm.
3. Press the LIGHT/SNOOZE button at any time to exit.
Settings Menu order:
• 12/24 Hour Time
• Hour
• Minutes
Weekday: Sets automatically when
• Year
Year, Month and Date are set.
• Month
• Date
• Fahrenheit/Celsius
A LAR M
Set Alarm:
1. Hold the ALARM button to enter Alarm Settings.
2. Use the + or - button to adjust values.
3. Press the ALARM button to confirm and move to next item.
Activate/Deactivate Alarm:
• Press the ALARM button once to view alarm time. Then press
the ALARM button to activate or deactivate the alarm.
• The Alarm Icon will show when alarm is active.
Silence a sounding alarm: Press any button except SNOOZE to
silence alarm for 24 hours.
Page 3