Operation Instructions; Setting Temperature - Kegco VSCB24 Instruction Manual

Craft beer center
Table of Contents

Advertisement

Operation Instructions

The craft beer center should be placed in an area where the ambient temperature is between 32-100 degrees
Fahrenheit. If the ambient temperature is above or below this range, the performance of the unit may be affected. For
example, placing your unit in extreme cold or hot conditions may cause the interior temperatures to fluctuate.
Your Kegco Craft Beer Center includes an operating panel on the front. The operating panel includes several features to
operate and control the temperature of the craft beer center, including:
ON/OFF - Turns the unit on or off
TEMP SET - Displays the desired temperature on an LED display
UP/DOWN Buttons – Increases or decreases the temperature in 1 degree increments
°C / °F – Indicates whether the displayed temperature is in Celsius and Fahrenheit
°C / °F Button – Toggles the displayed temperature between Celsius and Fahrenheit
LIGHT - Turns the interior light on or off
If you are going on vacation, you may leave the craft beer center operating during vacations of less than three weeks. If
the appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry
the interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.

Setting Temperature

This Kegco Craft Beer Center has a temperature range of 39 to 64 degrees Fahrenheit. You can set the temperature as
you desire by touching the UP or DOWN button. When you touch the buttons for the first time, the LED readout will
show the original temperature set at the manufacturing facility. Each push of the button will adjust the temperature by
one degree in the desired direction. Please be aware that the desired temperatures may fluctuate depending on
whether the interior light is ON or OFF and depending on the positioning of the cans and bottles.
PLEASE NOTE:
In the event of a power interruption, all previous temperature settings will be automatically saved and the unit
will return to the previous temperature setting.
If the unit is unplugged, loses power, or is turned off, you must wait 3 to 5 minutes before restarting. Attempting
to restart the craft beer center before this time has elapsed may prevent it from starting.
When you use the craft beer center for the first time or restart the craft beer center after having been shut off
for a long time, there will be a few degrees variance between the temperature you select and the one indicated
on the LED readout for the first few hours of operation. After a few hours of operation, the temperature will
normalize to the displayed temperature.
www.kegco.com
6
1-888-980-4810

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vscb-24ssrnVscb-24sr20

Table of Contents