Table of Contents
Advertisement
System Connections (continued)
„ Placing the speaker system
To enjoy the surround effect, we recommend that you place each speaker as shown
to the below.
Front speaker
(Left)
Surround speaker
(Left)
Installation of the surround speakers:
If possible, mount the surround speakers on the wall. Install them 60 cm - 90 cm (23"
- 35") above the height of your ears when you are seated.
Example: when installed on the wall
Note:
When the surround speakers are not installed on the wall, the speaker badge will be
upside down. In this case, you can adjust the badge to face the proper direction by
turning it by hand.
E-11
ENGLISH
Main unit
TV
Front speaker
(Right)
Surround speaker
(Right)
Example: when installed vertically
Wall
60 - 90 cm
(23" - 35")
Badge
„ To mount the surround speakers on the
wall
The design of the surround speakers allows them to be hung on the wall. Be sure to
use the type and size of screw that is shown to the below.
5 mm (3/16")
Min. 22 mm (7/8")
1
Drive one screw through the wall for each speaker.
5 mm (3/16")
Wall mounting screw
Min. 17 mm (11/16")
Wall surface
z Make sure that both the screw and the wall can support a load of 20 kg (45
lbs.).
z Drive the screws, so there is about a 5 mm (3/16") space between the wall
and the head of the screw.
2
Mount the surround speaker on the wall so that the screw head is
inserted into the slot on the surround speaker.
Wall surface
3.2 mm (1/8")
9 mm (3/8")
Advertisement
Table of Contents
