3 Disassembly and Reassembly
3-1-2 LS17E34C
3-2
6. Remove 2 screws from the shield.
Disconnect IR PCB cable. (see illustrations)
7. Lift up the shield D-SUB.
Disconnect LVDS cable. (see illustrations)
8. Lift up the panel. (see illustrations)
1. Loacte the monitor on the cushioned table
with face down. Remove the stand from LCD-
TV and pull the rear cover by pressing a hand.
2. Remove power cable on the hand and signal
cable on the driver.
3. Remove 2 screws on the rear cover and
remove the rear cover by using opening jig.
LS15E33C/LS17E34C