Table of Contents
Advertisement
6. Click
icon. After display "Chip erase OK.", "Programming Success", "ISP OFF", it means F/W updated
OK, it will show as the follow picture:
12.4 Check the firmware version:
Take the 202E2 for example as below.
1. Press
and
picture will appear on the top left corner. Choose "Input" item, and then choose "Factory", you will enter into the
factory mode.
2. If the firmware version is the same as the version that you have loaded, it means the ISP writing successful.
3. Screen is 48 gray-scale, Choose "AUTO level", PC will switch to the gray-scale screen, and press "MENU"
button again, it will show "ok" meaning "AUTO COLOR" OK, as the following picture
buttons at the same time, power on the monitor, and then press the menu again; the
Meridian 2
55
Advertisement
Table of Contents
