Advertisement
installation and external connection
INSTALLATION
- Inserted in the doorframe / attached to the wall
1.
Two 6-32 or M3 holes are 3.3" (8.38 cm) away from each other vertically; between the two exists one 1/2" hole
through which the reader cables are arranged. The midway hole is located 1.7" (4.31cm) down from the upper hole.
(If the product is already installed, you can skip the follow step)
2.
Insert the reader cables to the midway hole and fi x the reader module with two 6-32 or M3 screws.
3.
Insert the reader module into the appearance case and tighten the screw (M6x8mm) using the hex wrench.
Upper
6-32 hole
1.7"
(4.31cm)
3.3"
(8.38cm)
1/2"hole
6-32 hole
Lower
Wall Mount
Mullion Mount
6-32 or M3 Screws
Reader
Module
Bezel
3mm Hex Wrench
6-32 or M3 Screws
Gang Box
Reader
Module
Bezel
3mm Hex Wrench
Electric Gang Box Mount
English _ 9
Advertisement
