Caution Phrases - Canon XL1 Instruction Manual

Time Code
This records counter information, including hour,
minute, second, and frame number on a special
data code area on the tape itself. It is reset
automatically when a new tape is loaded.
Recording reminder
0 sec
0 1 sec
When you start recording, the camera counts from
0SEC to 10SEC. Shots which are shorter than 10
seconds may be difficult to edit later. On the other
hand, if you are not planning to edit the recording,
remember that a shot which does not contain action
should generally last no longer than 10 seconds.

Caution phrases

The camera displays various caution phrases —
they appear for 4 seconds before disappearing.
Appears each time you turn the
power on, until you set the date
and time (p. 22).
Refer to pages 8-9.
Refer to page 23.
0 : 1 2 : 3 4 : 2 5
SET THE DATE AND T IME
CHECK THE LENS
EN TERING "PO ER W S TANDBY"
Appears when the battery pack
is exhausted (p. 14, 62).
Appears when the tape has
reached the end.
Refer to page 16.
Appears when you press the 2
(record) button if the DV cable
is not connected properly
(p. 58).
Refer to page 68.
Appears as a warning to protect
the tape and also when
condensation is detected.
Remove the tape as soon as
possible after the camera has
displayed the caution.
Refer to page 59.
Refer to page 59.
E
CHANGE THE BATTERY PACK
TAPE END
TH E TAPE IS SET FOR
UR S E PRE EN V TION
ER A
CHECK THE DV NPUT I
CONDENSATION
HAS BEEN DET CTED E
REMOVE THE CAS ETTE S
COPY R IGHT PROTECT E D
PLAYBACK I S STRI R E CTED
COPY R IGHT PROTECT E D
DUBBING STRI R E CTED
83