Motorola PIP10 User Manual page 3

Baby monitor setup and use:
• Determine a location for the baby unit that will allow you to hear your baby
in his/her cot.
• Place the baby unit on a flat surface, such as a dresser, bureau, or shelf or
mount the unit to a wall securely using the keyhole slots under the stand.
• NEVER place the baby unit or cords within the cot.
WARNING
This digital audio baby monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the User
Guide, safe to use. Therefore, always read the instructions in this User Guide
carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This digital audio baby monitor is not a substitute for responsible adult
supervision.
• Keep this User Guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the digital audio baby monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the digital audio baby monitor in damp areas or close to water.
• Do not install the digital audio baby monitor in extreme cold or heat, direct
sunlight, or close to a heat source.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adaptors to easily accessible mains power.
CAUTION
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.