Frigidaire Professional FPCF3091LF User & Care Manual page 18

SETTING SURFACE CONTROLS
Setting radiant elements and induction zones
(cont'd)
Pan preheat recommendations
When preheating a pan on the cooktop always watch very
carefully. Whenever using the cooktop the user should
always pay attention to any pan and items cooking and
remain attentive until the cooking process is complete.
Keep in mind that induction cooking may decrease the
amount of time required to preheat a cooking utensil.
IMPORTANT
• The HE (hot element) message may appear in the
display windows once a heating element or cooking
zone is turned OFF and will remain ON until the
heating surface area or areas have cooled sufficiently.
• Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic
glass cooktop. If these items melt on the cooktop
they may damage the ceramic cooktop.
• Induction cooking zones only - If the cookware is
moved from the center of any active induction cooking
zone, the pan sensor will detect the situation and the
cookware will no longer heat. The affected cooking
zone display window will flash until the cookware is
moved back to center of cooking zone. If the
cookware is placed back properly centered on the
cooking zone the zone will resume heating. The
cooking zone will remember the power level setting
for up to 3 minutes before the cooking zone will
automatically shut OFF.
18