Table of Contents
Advertisement
To Remove and Replace
Right Oven Door
The door is heavy. After
removing door, lay it flat on the floor with
its inside facing down.
Hinge lever
Hook
Lock in
Hinge
normal position
Support
To Remove and Replace
Storage Drawer
Figure 1
Figure 2
1. Open the door to the fully opened position.
2. Pull up the lock located on both hinge supports and engage it in the hinge
levers. You may have to apply a little downward pressure on the door to pull the
locks fully over the hooks.
3. Grab the door by the sides, pull the bottom of the door up and toward you to
disengage the hinge supports. Keep pulling the bottom of the door toward you
while rotating the top of the door toward the range to completely disengage the
hinge levers.
4. To replace the door, reverse the door removal steps. Make sure the hinge sup-
ports are fully engaged before unlocking the hinge levers.
Lock engaged
for door removal
To Remove Storage Drawer:
1. Open the drawer to the fully opened position.
2. Locate the glide lever on each side of drawer; pull up on the left glide lever and
push down on the right glide lever (see figure 1).
3. Pull the drawer away from the range.
To Replace Storage Drawer:
1. Pull the bearing glides to the front of the range (see figure 2).
2. Align the drawer glides with the slots on the bearing glides.
3. Push the drawer into the range until the glides levers "click" (approx. 2 in.). Pull
the drawer open again to seat it into position.
4. If you do not hear the glide levers "click" or if the drawer does not feel
seated, remove it and repeat steps 1 through 3. Doing so will minimize
damage to the bearing glides. Do not try to force the drawer into place.
20
Hinge Slot
Door removed
from range
Advertisement
Table of Contents
