Advertisement
All manuals and user guides at all-guides.com
remote controller. / If there is no abnormality, "AOK " will be
displayed.
Note:
If it is displayed "ANG ", check "7. Troubleshooting Guide" in the order.
4. Press
key ("AOK " or "ANG " changes to "T2E ").
5. After the adjustment is finished, remove the disc.
6.2.5. Playback-only disc automatic adjustment
1. Have "T3E " indicated on display, set the playback-only disc. /
(Check to make sure the disc is properly seated.)
2. Press
key of the remote controller. The adjustment is
started.
3. During adjustment. "AADJ " is displayed on the LCD of the
remote controller. / If there is no abnormality, "AOK " will be
displayed.
Note:
If it is displayed "ONG ", check "7. Troubleshooting Guide" in the order.
4. Press
key ("OOK " or "ONG " changes to "T3E ").
5. After the adjustment is finished, remove the disc.
6.2.6. How to get out the adjustment mode
Remove the battery when you finish the adjustment.
6.3. Checking the main unit's keys
1. Set the battery and connect the remote controller.
2. Turn off the power, and switch main unit's HOLD switch ON.
3. Press the VOL+( ), VOL-( ),
remote controller within two seconds. (asshown in
4. When the unit enters the unit key check mode, the display shows
"E KEX ". While "E KEX " is displayed, press the
VOL+, VOL- and HOLD keys of the unit. / *When the first key is
pressed, the display will change to "E
( ), and
( ) keys on the
".
Fig. 5
)
,
,
,
Advertisement
