Canon PowerShot SX210 IS User Manual page 163

Cannot magnify!/Cannot rotate/Cannot modify image/Cannot register this
image!/Cannot modify/Cannot assign to category
• Incompatible images cannot be magnified (p. 116), tagged as favorites (p. 127),
rotated (p. 129), edited (pp. 130 – 134), registered to the start-up screen (p. 145),
categorized (p. 125), or added to a print list (pp. 138, 140).
• Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not be magnified, tagged as favorites, rotated,
edited, registered to the start-up screen, categorized, or added to a print list.
• Movies cannot be magnified (p. 116), edited (pp. 130 – 134), added to a print list
(p. 138), or registered to the start-up screen (p. 145).
Invalid selection range
• When choosing the selection range (pp. 121, 124, 127), you tried to choose a starting
image that was after the last image or you tried to choose an ending image that was
before the starting image.
Exceeded selection limit
• You chose more than 998 images in print settings. Choose less than 998 images
(p. 140).
• Print settings could not be saved correctly. Reduce the number of selected images and
try again (p. 140).
• You chose 501 or more images in Protect (p. 120), Erase (p. 123), My Category
(p. 125) and Favorites (p. 127).
Communication error
• Images could not be transferred to the computer or printed due to the large amount of
images (approx. 1000) stored on the memory card. Use a commercially available USB
card reader to transfer the images. Insert the memory card into the printer's card slot
to print.
Naming error!
• The folder or image could not be created because there is an image with the same file
name as the folder or image that the camera is attempting to create, or the highest
possible file number has already been reached. In the 3 menu, change [File
Numbering] to [Auto Reset] (p. 146) or format the memory card (pp. 22, 51).
Lens Error
• This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
• If this error message continues to appear, contact a Canon Customer Support Help
Desk as there may be a problem with the lens.
A camera error was detected (Error number)
• If an error code appears directly after taking a picture, the shot may not have been
recorded. Check the image in Playback mode.
• If this error code reappears, note the Error number (Exx) and contact your Canon
Customer Support Help Desk as there may be a problem with the camera.
List of Messages That Appear on the Screen
163