Troubleshooting; Important Note - VTech Marble Rush Launchpad Set Instruction Manual

TROUBLESHOOTING

If for some reason the unit stops working , please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to play again.
5. If the unit still does not work, install a brand new set of batteries.

IMPORTANT NOTE:

If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or by
going to our website vtechkids.com and filling out our Contact Us form
located under the Customer Support link. Creating and developing
VTech products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However, errors
sometimes can occur. It is important for you to know that we stand
behind our products and encourage you to contact us with any
problems and/or suggestions you might have. A service representative
will be happy to help you.
Note
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
7