Registering Magic Remote - LG 42LF650T Owner's Manual

the remote control sensor on the TV. To remove the
batteries, perform the installation actions in reverse.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV's remote
sensor.
CAUTION
y Do not mix old and new batteries,
y
as this may damage the remote control.
A
(POWER) Turns the TV on or off.
Navigation buttons (up/down/left/right)
Press the up, down, left or right button to scroll
the menu. If you press
pointer is in use, the pointer will disappear from the
screen and Magic Remote will operate like a general
remote control. To display the pointer on the screen
again, shake Magic Remote to the left and right.
(BACK) Returns to the previous screen.
(Home) Accesses the Home menu.
Wheel (OK) Press the center of the Wheel button
to select a menu. You can change channels by using
the Wheel button.
(EXIT to LIVE) Switches among broadcast
(antenna) and various inputs.
(Voice recognition)
Network connection is required to use the voice
recognition function.
1. Press the voice recognition button.
2. Speak when the voice display window appears on
the TV screen.
* Use the Magic remote no further than 10 cm from
your face.
* The voice recognition may fail when you speak too
fast or too slowly.
* The recognition rate may vary depending upon
the user's characteristics (voice, pronunciation,
intonation, and speed) and the environment (noise
and TV volume).
Color buttons These access special functions in
some menus. ( Red,
Blue)
A
buttons while the
Green, Yellow,
B
Adjusts the volume level.
Displays the Screen Remote.
* Accesses the Universal Control Menu in some
regions.
* Pressing and holding the
menu to select an external device that is connected
to the TV.
Used for viewing 3D video. (For 3D models)
(MUTE) Mutes all sounds.
Scrolls through the saved channels.

Registering Magic Remote

How to register the Magic Remote
To use the Magic Remote, first pair it
with your TV.
1 Put batteries into the Magic Remote
and turn the TV on.
2 Point the Magic Remote at your TV
and press the
remote control.
(Wheel)
* If the TV fails to register the Magic
Remote, try again after turning the TV
off and back on.
How to deregister the Magic Remote
Press the
the same time, for five seconds, to unpair
(BACK) the Magic Remote with your TV.
Pressing and holding the
button will let you cancel and re-register
(Home) Magic Remote at once.
B
button will display a
Wheel (OK) on the
(BACK) and (Home) at
(EXIT to LIVE)
13