Led Light; Flash - Canon PICTBRIDGE DC22 Instruction Manual

Canon camcorder user manual
Hide thumbs Also See for PICTBRIDGE DC22:
Table of Contents

Advertisement

Other Recording Options
58

LED Light

You can turn on the LED light (assist
lamp) at any time regardless of the
recording program.
Press
LIGHT
.
appears on the screen.
• Press
again to turn the LED light off.
LIGHT

Flash

You can use the built-in flash for
recording still images in dark places. The
flash is equipped with the red-eye
reduction function.
POINTS TO CHECK
Select a recording program other than
[
FIREWORKS] (
Options
(auto)
The flash fires automatically according to
the brightness of the subject.
(red-eye reduction, auto)
The flash fires automatically according to
the brightness of the subject. The assist
lamp lights up to reduce the red-eye effect.
(flash on)
The flash always fires.
(flash off)
The flash does not fire.
(
13)
LIGHT button
(
13)
).
Default value
(flash) button
1
Press
(flash button).
• Repeatedly pressing
between the flash modes.
• The display
seconds.
2
Press
, first halfway to
PHOTO
activate the autofocus and then
fully to record the still image.
NOTES
The practical range of the flash is approx. 1 to
2 m (3.3 to 6.6 ft.). The range depends on the
recording conditions.
The range of the flash decreases in
continuous shooting mode.
For the red-eye reduction to be effective, the
subject needs to look at the assist lamp. The
degree of reduction depends on the distance
and on each individual.
The red-eye reduction mode cannot be used
in Stitch Assist mode.
The flash will not fire in the following cases:
- When you manually adjust the exposure in
(auto) or
(red-eye reduction) mode.
- During auto exposure bracketing.
The flash mode cannot be selected when the
exposure is locked, or after the first still image in
Stitch Assist mode.
About the AF-Assist Lamp: While you press
halfway, if the subject is too dark the
PHOTO
assist lamp may light up briefly in order to
enable the camcorder to focus more accurately
(AF-assist lamp). You can also set [AF AST
LAMP] to [
OFF] so the assist lamp does
not light up.
- The camcorder may not be able to focus even
if the AF-assist lamp is on.
- The brightness of the AF-assist lamp could be
an inconvenience. Consider turning it off in
public places such as restaurants or theaters.
will cycle
disappears after 4

Advertisement

Table of Contents
loading

Table of Contents