1050 Speakers; Speakers - Lenovo ideapad 100S-11IBR Hardware Maintenance Manual

Lenovo ideapad 100S-11IBR Hardware Maintenance Manual

1050 Speakers

For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
Figure 5. Removal steps of speakers
Detach the speaker connector in the direction shown by arrow 1 and release
the cable from the cable guide. Remove the screws 2. Then remove the
speakers in the direction shown by arrows 3.
When installing:
• Route the cables along the cable guides. As you route the cables, make sure
• Make sure that the speaker connector is attached firmly.
38
2
3
2
Step Screw (quantity)
M2 × 2.5 mm, Phillips-head, nylok-coated (4)
2
Speaker
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
1
3
2
2
Color Torque
Black 2.5±0.2Kgf