Nokia 2170 Owner's Manual page 35

All manuals and user guides at all-guides.com
Dialing Use for cards that
Sequence
Access No. Dial 1-800 access number,
+ Phone No. then phone number, then card
+ Card No. + PIN number + PIN (if required)
Access No. Dial 1-800 access number,
+ Card No. + PIN then card number + PIN (if
+ Phone No. required), then phone number
Prefix Dial the prefix (any numbers
+ Phone No. that must precede the phone
+ Card No. + PIN number) and phone number
you want to dial, then card
number, then PIN (if required)
∗
These calling cards are frequently used with these dialing
sequences. However, they may vary and are subject to
change at the phone company’s discretion.
To make a calling card call
1) Enter the phone number,
including any prefix that your
calling card may require
2) Press and hold
seconds until the phone displays
&$5' &$//
3) When you hear a tone or voice prompt, press 2. .
When you hear another tone or voice prompt, press
2. again.
You may also use the keypad, when necessary, to send
any other numbers that must be sent along with any
stored calling card information.
To change stored calling card information
If you wish to change any calling card information already
stored in your phone, simply follow the same instructions
used to store a new calling card.
require you to:
ó
for a few
28
Cards
using this
*
sequence
MCI, AT&T True
Choice, Sprint
Canada, Unitel
networkMCI,
WorldPhone MCI
GTE, PacBell,
AT&T, Stentor