Front Towing Eyebolt - Honda Acura NSX 2017 Towing And Road Service Manual

CAR CARRIER LOADING PROCEDURES:
Car Carrier Loading Procedures:
• Before loading, secure the vehicle, ensure the transmission is in
Neutral and the parking brake is released if possible.
Front Attachment Location:
This vehicle is equipped with a towing eyebolt that should be used
for loading and unloading. It is located in the toolkit found in the
rear hatch.
NOTE: Do not use if the eyebolt or receiver is damaged.
• Remove the towing eyebolt receiver cover, located on the driv-
er's side of the front grill by gently prying the upper corner with
a plastic trim tool. Use caution to avoid scratching the surfaces.
• Carefully remove the cover and attachment tether.
• Store the eyebolt receiver cover in the vehicle for safe keeping
during transport.
• Install the eyebolt by turning it clockwise until fully seated.
NOTE: The eyebolt is designed for a straight pull within a 20 degree
window. Only load the vehicle onto the carrier deck far enough to
safely transport the vehicle. Stop loading when the winch line begins
to pull downward. To prevent downward pull, keep the leading edge
of the vehicle at least 2 feet from the winch drum (this will vary
based on the towing equipment used).
8