Page 12
Warning! Safety instructions • Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out. • Ensure the power cord does not come into contact with hot objects such as a heater. This may cause a fire or an electric shock hazard. • ...
Page 13
• Only use an authorized AC adapter and power cord approved by the power plug to the wall outlet. (Do not use the power plug for LG Electronics. Otherwise, this may result in fire, electric shock, switch.) It may cause mechanical failure or could give an electric malfunction or product deformation.
Page 14
Preparing • Prevent dust collecting on the power plug pins or outlet. This may cause a fire hazard. • Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. • ...
Lifting and moving the TV • Do not use any unapproved items to ensure the safety and product life span. • Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s warranty. Please note the following advice to prevent the TV from being scratched • ...
Using the button Basic functions <A type> (Depending on model) Power On (Press) Power Off (Press and hold) You can simply operate the TV functions, using the button. Volume Control <A type> Programmes Control <B type> Power On (Press) Power Off (Press and Hold) Menu Control (Press Menu Selection (Press and Hold 1 If the Menu button is on the screen, pressing and holding the button...
Mounting on a table Attaching the TV to a desk (This feature is not available for all models.) The TV should be attached to a desk so it cannot be pulled in a forward/ 1 Lift and tilt the TV into its upright position on a table. backward direction, potentially causing injury or damaging the product.
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please...
Connections (notifications) Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Connect various external devices to the TV and switch input modes to Separate purchase(Wall Mounting Bracket) select an external device.
CI module connection Method of Volume control port (Depending on model) (Depending on model) • Cable Spec. View the encrypted (pay) services in digital TV mode. • Check if the CI module is inserted into the PCMCIA card slot in the Each Up / Down pin right direction.
Other connections (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. Connect your TV to external devices. For the best picture and audio Recalls your preferred subtitle in digital mode. quality, connect the external device and the TV with the HDMI cable. Audio descriptions function will be enabled.
(Depending on model) (POWER) Turns the TV on or off. Adjusts the brightness of the screen to reduce energy consumption. Selects an AV mode. Changes the input source. Selects Radio, TV and DTV programme. Number buttons Enters numbers. Accesses the saved programme list. Returns to the previously viewed programme.
Manufactured under license from Dolby Laboratories. Dolby, Dolby for download. LG Electronics will also provide open source code to Vision, Dolby Audio, and the double-D symbol are trademarks of you on CD-ROM for a charge covering the cost of performing such Dolby Laboratories.
Abnormal Display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. • This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel.
Specifications CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % 1 Only Satellite models.
Page 26
HDMI/DVI-DTV supported mode HDMI/DVI-PC supported mode (Use HDMI IN 1 for PC mode) Horizontal Vertical Resolution Frequency (kHz) Frequency (Hz) Horizontal Vertical Resolution Frequency (kHz) Frequency (Hz) 31.46 59.94 640 x 480 31.50 60.00 640 x 350 31.468 70.09 31.469 59.94 720 x 400 31.469...
Supported photo formats • Category : 2D (jpeg, jpg, jpe) [Available file type] SOF0 : Baseline, SOF1 : Extend Sequential, SOF2 : Progressive [Photo size] Minimum : 64 x 64, Maximum (Normal Type) : 15360 (W) x 8640 (H), Maximum (Progressive Type) : 1920 (W) x 1440 (H) • ...
Page 29
IR CODES This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button...
EXTERNAL CONTROL Type of Connector : D-Sub 9-Pin Male DEVICE SETUP RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations (Standard RS-232C cable) DATA COMMAND1 COMMAND2 (Hexadecimal) 01. Power 00 to 01 02. Aspect Ratio (See p. 4) 03. Screen Mute (See p. 5) 04. Volume 00 to 01 Mute 05.
Transmission / Receiving Protocol 01. Power (Command: k a) ► To control Power On/Off of the set. (Depending on Model) Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Power Off 01 : Power On [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [a][ ][Set ID][ ][OK/NG][Data][x] [Command 2] : Second command to control the TV.
Page 33
03. Screen Mute (Command: k d) 05. Volume Control (Command: k f) ► To select screen mute on/off. ► To adjust volume. You can also adjust volume with the volume buttons on remote Transmission control. [k][d][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Screen mute off (Picture on) [k][f][ ][Set ID][ ][Data][Cr]...
Page 34
08. Colour (Command: k i) 12. Remote control lock mode (Command: k m) ► To adjust the screen Colour. ► To lock the front panel controls on the monitor and remote control. You can also adjust colour in the PICTURE menu. Transmission Transmission [k][m][ ][Set ID][ ][Data][Cr]...
Page 35
15. Energy Saving (Command: j q) 17. Equalize (Command : j v) ► To reduce the power consumption of the TV. You can also adjust ► To adjust equalize. Energy Saving in PICTURE menu. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Power Saving Level...
Page 36
22. Input select (Command: x b) Channel data range (Main Picture Input) Min : 00 Max : 270F (0 to 9999) ► To select input source for main picture. [a][ ][Set ID][ ][OK/NG][Data][x] Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure 19.
Page 37
* Real data mapping 00 : Step 0 Step 10 (Set ID 10) Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE :...
Page 38
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...