Remote Control Battery Installation; Remote Control Precautions - NEC MultiSync LT50 User Manual

Micro-portable
Hide thumbs Also See for MultiSync LT50:
Table of Contents

Advertisement

28
28. Remote Jack
Not available on this model.
*NOTE: The default is the Computer mode, which allows you to use the Mouse,
R-Click/Cancel, and L-Click/Enter buttons as your computer mouse. When
the MENU, HELP, POINTER, PC CARD, FOLDER LIST, or SLIDE LIST button is
pressed, the PJ button lights red to indicate that you are in the Projector mode.
If no buttons are pressed within 10 seconds, the light goes out and the Projec-
tor mode is canceled.
Operating Range for Optional Presentation Remote Control
When operating the projector:
7m
30˚
30˚

Remote Control Battery Installation

1
2
7m
30˚
30˚
3
Do not mix different types of batteries or new and old batteries.

Remote Control Precautions

• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time, remove
• Do not place the batteries upside down.
• Do not look into the laser pointer while it is on.
• Do not point the laser beam at a person.
E–16
Press firmly and slide the battery cover off.
Remove both old batteries and install new ones (AA). Ensure
that you have the batteries' polarity (+/-) aligned correctly.
Slip the cover back over the batteries until it snaps into place.
the batteries.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisync lt85

Table of Contents