Download Print this page

Locosys RTK15D Series Quick Start Manual

Advertisement

Quick Links

www.locosystech.com
Quick Start Guide For
RTK15D Series Products
© 2021 LOCOSYS Technology Inc.
V1.1

Advertisement

loading

Summary of Contents for Locosys RTK15D Series

  • Page 1 Quick Start Guide For RTK15D Series Products © 2021 LOCOSYS Technology Inc. V1.1...
  • Page 2: Getting Started

    Quick start guide for RTK15D series products 1. Introduction RTK15D series products are compact portable devices that can quickly equip smartphones with centimeter-accurate RTK. They are easy to use and do not require any complicated wireless or Bluetooth paring and connection operations. For the first time use, just install the mobile APP on your smartphone, enter NTRIP settings, and you are ready to use.
  • Page 3 Quick start guide for RTK15D series products 3. Touch the button in the upper right corner. Then select “Configuration”. 4. Select Role as Rover. Enter NTRIP settings including IP, Port, User and Password. Then touch “Get List” button and select “Mount Point”. You can touch “Key in” button to enter Mount Point, too.
  • Page 4 Quick start guide for RTK15D series products 5. Connect USB cable to both the device (RTK15D series product) and your smartphone. Check the items and press OK as below pictures. These operations allow APP to automatically pop up and start RTK positioning when the device (RTK15D series product) is plugged into your smartphone.
  • Page 5 Quick start guide for RTK15D series products 3. How to configure the device to be a base station? In addition to be a rover that provides RTK positioning, RTK15D series products can also be configured to be a base station. The steps are as follows.
  • Page 6 Quick start guide for RTK15D series products 3. Now the device performs as a base station. The location shown below is what you entered in step 2 above. Please note GNSS antenna of the base station should be mounted where a 360° unobstructed clear view of the sky (at 10°...
  • Page 7: Device Info

    If you have two devices (RTK15D series products), you can configure one as the base station and another as the rover. Then use LOCOSYS’s free service of NTRIP caster to link them. Below is the information of LOCOSYS NTRIP caster.
  • Page 8 Quick start guide for RTK15D series products 9. About Display application version and other information about application. Page 7 of 7...