Ec Declaration Of Conformity - Husqvarna 545FX Operator's Manual

545FR
Approved accessories
Centre hole in blades/cutters, Ø 25,4
mm
Grass blade/grass cutter
Saw blade
Plastic blades
Trimmer head
Support cup
Shredder blade

EC Declaration of Conformity

We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Husqvarna
545FR, 545FX/FXT, 545RX and 545RXT with serial numbers dating from 2016 onwards (the year is clearly stated on
the rating plate, followed by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V. For information relating to noise emissions, see the Technical data chapter.
- of June 8, 2011 "on the restriction of the use of certain hazardous substances in electrical and electronic equipment"
2011/65/EU.
The following standards have been applied:
EN ISO 12100:2010, EN ISO 11806:2011, EN ISO 14982:2009, CISPR 12:2007+A:2009, EN 50581:2012
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary type examination
on behalf of Husqvarna AB. The certificates are numbered:
SEC/11/2294 - 545FR, SEC/11/2293 - 545RX, RXT, SEC/11/2292 - 545FX, 545FXT.
SMP Svensk Maskinprovning AB has also verified agreement with appendix V of the council's directive 2000/14/EG. The
certificates have the numbers:
01/164/073 - 545FR, 01/164/073 - 545RX, RXT, 01/164/072 - 545FX, 545FXT.
Huskvarna March 30, 2016
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
TECHNICAL DATA
Type
Output shaft thread M12
Multi 255-3 (Ø 255 3 teeth)
Multi 275-4 (Ø 275 4 teeth)
Multi 300-3 (Ø 300 3 teeth)
Maxi XS 200-22 (Ø 200 22 teeth)
Scarlet 200-22 (Ø 200 22 teeth)
Tricut Ø 300 mm (Separate blades
have part number 531 01 77-15)
Trimmy S II (Ø 2.4 - 3.3 mm cord)
Auto 55 (Ø 2.7 - 3.3 mm cord)
T45x (Ø 2.7 - 3.3 mm cord)
Fixed
Cutting attachment guard, Art. no.
537 28 85-01 / 544 46 43-01
537 28 85-01 / 544 46 43-01
537 28 85-01 / 544 46 43-01
537 31 09-01
537 31 09-01
537 28 85-01 / 544 46 43-01
503 95 43-01 / 544 46 43-01
503 95 43-01 / 544 46 43-01
503 95 43-01 / 544 46 43-01
544 02 65-02
English – 37