Canon elura50 Instruction Manual page 133

\
3. Select [ PRINT].
• The print setting menu appears.
• "Set print order" appears, when you connect a printer with direct print
function and select [\
settings.
• The total number of prints set in the print mark settings is displayed on the
upper left of the screen.
4. Set the print style.
• Setting the Print Style (
5. In the print setting menu, turn the selector dial to select [OK] and
press the SET button.
• Printing starts. The print setting menu disappears when printing is complete.
Notes:
• Cancel Printing
Press the SET button while "Now Printing" is displayed. A confirmation dialog
appears. Select [OK] and press the SET button. Printing stops even if it is
incomplete and the paper is fed through.
• Restarting Printing (with
Open the CARD PLAY (VCR) menu and select [\
[Restart] in the print setting menu and press the SET button. The remaining
images will be printed.
Printing cannot be restarted in the following cases:
- When you change the print mark settings.
- When you delete a single image with print mark settings.
• Printing Errors
- If an error occurs during the printing process, an error message appears
( 165).
- Bubble Jet Printer: With most errors, printing resumes automatically after you
correct the error. If the error persists, press the SET button to cancel printing.
Refer also to the Bubble Jet Printer Quick Start Guide for details.
- Card Photo Printer: Turn the selector dial to select [Stop] or [Restart] and
press the SET button. (The [Restart] setting may not appear with some error
messages. In that case, select [Stop].)
• Follow below procedure when disconnecting the interface cable:
1. Disconnect the cable from the camcorder and printer.
2. Turn off the camcorder.
PRINT] without having set the print mark
129).
print mark only)
PRINT]. Select
E
133