JVC KW-AVX820EE Instructions Manual page 19

11
* The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through
the camera appears on the screen in <Full> aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position. When you press DISP on the monitor panel, or when you shift the gear to another
position other than the reverse (R) position, the rear view screen is cleared.
* 12
While the pictures through the camera are shown on the monitor, no message will be displayed.
13
* Not selectable when the component connected to the CD changer jack is selected as the source.
* 14
The name of the component detected through the CD changer jack is shown.
* 15
The TEL MUTING lead connection is required. See Installation/Connection Manual.
Equalizer
Selects a preset sound mode suitable to the music
genre.
♦
Flat (Initial), Hard Rock, R&B, Pop, Jazz, Dance,
Country, Reggae, Classic, User1, User2, User3
Equalizer
Back Edit
Moves to the other 6
sound modes.
Preset equalizing values
Sound
mode
Flat 00 00 00 00 00 00 00
Hard Rock +03 +03 +01 00 00 +02 +01
R&B +03 +02 +02 00 +01 +01 +03
Pop 00 +02 00 00 +01 +01 +02
Jazz +03 +02 +01 +01 +01 +03 +02
Dance +04 +02 00 –02 –01 +01 +01
Country +02 +01 00 00 00 +01 +02
Reggae +03 00 00 +01 +02 +02 +03
Classic +02 +03 +01 00 00 +02 00
User1/2/3 00 00 00 00 00 00 00
Makes adjustments by
moving each bar directly.
Storing your own adjustments
You can store your adjustments into <User1>,
<User2>, and <User3>.
1
Display <AV Menu> screen.
2
Display <Equalizer> screen.
3
Make the setting, then store.
Equalizer
Back Edit
User1
User2
User3
Back
Ex.: When storing into <
or
Exit
User2
>.
AV MENU 19